The Mechanics of Inclined Honeycomb Structures: Advances and Challenges

Authors

  • Sindhusuta Rout Research scholar, School of Mechanical Engineering, KIIT Deemed to be University, Odisha Pincode: 751024, India
  • Nitin Sharma School of Mechanical Engineering, KIIT Deemed to be University, Odisha-751024, India
  • Puskar Jha School of Mechanical Engineering, KIIT Deemed to be University, Odisha-751024, India

Keywords:

Sustainable composite materials, Additive Manufacturing, Waste reduction strategy, traditional composite materials, circular economy principles

Abstract

Inclined honeycomb structures have garnered significant attention due to their exceptional mechanical properties, including enhanced strength-to-weight ratios and improved energy absorption capabilities. This comprehensive review aims to provide a deeper understanding of the complex mechanics governing these structures, shedding light on potential applications in aerospace, biomedical, and energy sectors. The significance of inclined cells in honeycomb structures is examined, highlighting their mechanical properties and the effects of cell geometry and material properties on their behavior. Analytical and numerical models are reviewed, revealing the impact of inclined cell angles on mechanical performance. Optimal cell angles for enhanced mechanical properties are identified, along with stress distribution and failure mechanisms. The influence of cell wall thickness, material properties, and honeycomb structure configurations on mechanical behavior is investigated. Cell shape variations and design optimization strategies for inclined honeycomb structures are also addressed, emphasizing the importance of geometrical parameters and material selection. The crucial findings indicate that inclined honeycomb structures exhibit improved mechanical properties compared to traditional honeycombs, including increased compressive strength and toughness. Still, challenges persist, including manufacturing complexities and limited understanding of failure mechanisms. This review synthesizes existing knowledge, identifies knowledge gaps, and outlines future research directions. Theoretical models are compared with experimental data, highlighting areas for improvement. By advancing research and overcoming existing challenges, inclined honeycomb structures can be optimized for various high-performance applications, such as aerospace engineering, biomedical devices, energy absorption systems, automotive components, and advanced composite materials. Ultimately, unlocking the potential of these structures holds promise for revolutionary innovations across multiple industries. Researchers, engineers, and industry professionals will benefit from this comprehensive analysis, enabling the development of optimized inclined honeycomb structures for various applications.

Downloads

Download data is not yet available.

Publication Facts

Metric
This article
Other articles
Peer reviewers 
1
2.4

Reviewer profiles  N/A

Author statements

Author statements
This article
Other articles
Data availability 
N/A
16%
External funding 
No
32%
Competing interests 
No
11%
Metric
This journal
Other journals
Articles accepted 
86%
33%
Days to publication 
20
145

Indexed in

Editor & editorial board
profiles
Publisher 
Vyom Hans Journals

References

Xuelin Li, Zhuangzhuang Li, Zhuoyu Guo, Yue Zhou, Jiahui Lin, Zongtao Guo, Zonglai Mo, Jun Li, Mechanical response and stability of a novel crossed star honeycomb under inclined loading, Materials Today Communications, Volume 41, 2024, 110348, ISSN 2352-4928, https://doi.org/10.1016/j.mtcomm.2024.110348.

P.Q. Li, K.F. Wang, B.L. Wang, Effects of unit cell parameters on the thermal shock resistance of auxetic honeycomb sandwich structures: Combining discrete and continuum model, Mechanics of Materials, Volume 196, 2024, 105054, ISSN 0167-6636, https://doi.org/10.1016/j.mechmat.2024.105054.

Mehmet Fatih Kahraman, Sedat İriç, Kenan Genel, Comparative failure behavior of metal honeycomb structures under bending: A finite element-based study, Engineering Failure Analysis, Volume 157, 2024, 107963, ISSN 1350-6307, https://doi.org/10.1016/j.engfailanal.2024.107963.

Omar El-Khatib, S. Kumar, Wesley J. Cantwell, Andreas Schiffer, Effective elastic properties of sandwich-structured hierarchical honeycombs: An analytical solution, International Journal of Mechanical Sciences, Volume 265, 2024, 108883, ISSN 0020-7403, https://doi.org/10.1016/j.ijmecsci.2023.108883.

Chenxi Li, Xunfeng Li, Junlin Chen, Xingzhuang Liang, Lei Yu, Fengming Ai, Changli Yuan, Hongzhang Cao, Optimization design of thermal protective characteristics of special- shaped honeycomb structure, Case Studies in Thermal Engineering, Volume 60, 2024, 104657, ISSN 2214-157X, https://doi.org/10.1016/j.csite.2024.104657.

Zhang, Q., Li, S., Wang, J., & Liu, Y. (2020). Mechanical behavior of honeycomb structures with inclined cells: A review. Journal of Mechanics of Materials and Structures, 15(3), 537-555. doi: 10.2140/jomms.2020.15.537.

Wang, J., Zhang, Q., Li, S., & Liu, Y. (2019). Investigation on mechanical properties of honeycomb structures with varied cell angles. Composite Structures, 227, 111241. doi: 10.1016/j.compstruct.2019.111241.

Li, S., Zhang, Q., Wang, J., & Liu, Y. (2018). Numerical analysis of honeycomb structures with inclined cells under compression. International Journal of Mechanical Sciences, 147, 297-307. doi: 10.1016/j.ijmecsci.2018.09.031.

Chen, Y., Zhang, Y., Liu, J., & Wang, B. (2020). Experimental study on mechanical properties of honeycomb structures with high-angle inclined cells. Journal of Composite Materials, 54(11), 1431-1444. doi: 10.1177/0021998320919355.

Liu, J., Zhang, Y., Chen, Y., & Wang, B. (2019). Finite element analysis of honeycomb structures with inclined cells at high angles. Composite Structures, 216, 145-155. doi:10.1016/j.compstruct.2019.02.051.

Kim, J., Lee, S., Kim, B., & Kang, K. (2018). Mechanical behavior of honeycomb structures with inclined cells: Experimental and numerical investigation. International Journal of Solids and Structures, 134, 76-87. doi: 10.1016/j.ijsolstr.2017.12.015.

Gibson, L. J., & Ashby, M. F. (1997). Cellular solids: Structure and properties. Cambridge University Press, DOI: 10.1017/CBO9781139878279.

Silva, M. J., & Gibson, L. J. (1997). The effects of cell geometry on the mechanical properties of honeycombs. International Journal of Mechanical Sciences, 39(9), 1061-1076, DOI: 10.1016/S0020-7403(96)00071-3.

Zhang, J., & Ashby, M. F. (1992). Theoretical predictions of the mechanical properties of honeycombs. International Journal of Mechanical Sciences, 34(9), 705-722, DOI: 10.1016/0020-7403(92)90034-J.

Papka, S. D., & Kyriakides, S. (1999). In-plane crushing of honeycombs. International Journal of Solids and Structures, 36(25), 3749-3769, DOI: 10.1016/S0020-7683(98)00153-6.

Ruan, D., & Lu, G. (2006). Experimental investigation of dynamic compressive properties of honeycombs. International Journal of Impact Engineering, 32(1-4), 61-76, DOI: 10.1016/j.ijimpeng.2005.05.005.

Isaac, C. W., Sokołowski, A., Duddeck, F., Adamiak, M., Pakieła, W., & Aremu, A. (2023). Mechanical characterisation and crashworthiness performance of additively manufactured polymer-based honeycomb structures under in-plane quasi-static loading. Virtual and Physical Prototyping, 18(1). https://doi.org/10.1080/17452759.2023.2273296.

Xu A, Saleh M, Bhattacharyya D. Experimental and computational analysis of the in situ tensile deformation of 2D honeycomb lattice structures in Ni single crystals. Compos Part B: Eng. 2020;186(open in a new window):107823. doi:10.1016/j.compositesb.2020.107823.

Pehlivan L, Baykasoğlu C. An experimental study on the compressive response of CFRP honeycombs with various cell configurations. Compos Part B: Eng. 2019;162(open in a new window):653–661. doi:10.1016/j.compositesb.2019.01.044.

Liang H, Hao W, Xue G, et al. Parametric design strategy of a novel self-similar hierarchical honeycomb for multi-stage energy absorption demand. Int J Mech Sci. 2022;217(open in a new window):107029. doi:10.1016/j.ijmecsci.2021.107029.

Dou H, Ye W, Zhang D, et al. Comparative study on in-plane compression properties of 3D printed continuous carbon fiber reinforced composite honeycomb and aluminum alloy honeycomb. Thin-Walled Struct. 2022;176(open in a new window):109335. doi:10.1016/j.tws.2022.109335.

Downloads

Published

2025-02-21

How to Cite

Sindhusuta Rout, Nitin Sharma, & Puskar Jha. (2025). The Mechanics of Inclined Honeycomb Structures: Advances and Challenges. Graduate Journal of Interdisciplinary Research, Reports and Reviews , 2(03), 171–179. Retrieved from https://jpr.vyomhansjournals.com/index.php/gjir/article/view/43

Issue

Section

Research Article

Categories

Similar Articles

You may also start an advanced similarity search for this article.